Data sheet?
| Applicable fluid | (Pneumatic type) Air, Non-corrosive gas |
|---|---|
| Pressure port direction | Rear fitting |
| Pressure port | NPT1/8 |
| Connection type | Connector type(connector type cable: 2m) |
| Pressure type | Compound pressure |
| Rated pressure range | -101.3 to 100.0kPa |
| Display pressure unit | kPa, kgf/cm?, bar, psi, mmHg, inHg, mmH?? |
| Control output_NPN open collector | NPN open collector |
| Option input/output | Current output(DC4-20mA) |
| Power supply | 12-24VDC ?10%(ripple P-P: max. 10%) |
| Current consumption | Voltage output type: Max. 50mA Current output type: Max. 75mA |
| Protection structure | IP40 |
| Approval | ![]() |
| Control output_Hysteresis | Min. display interval |
| Control output_Repeat error | ?0.2% F.S. ?Min. display interval |
| Control output_Response time | Selectable 2.5ms, 5ms, 100ms, 500ms, 1000ms |
| Environment_Ambient temperature | -10 to 50?? storage: -20 to 60??/td> |
| Environment_Ambient humidity | 30 to 80% RH, storage: 30 to 80% RH |
| Material | Front, Rear case: Polycarbonate, Pressure port: Nickel Plated Brass |
| Weight | Approx. 165g(approx. 80g) |
??n hysteresis output mode, detection difference is variable.
??t is allowed to select one analog output type only.
??he weight includes packaging. The weight in parenthesis is for unit only.
??.S: Rated pressure.
??here may be ?1-digit error in hysteresis by pressure unit calculation error.
??he temperature or humidity mentioned in Environment indicates a non freezing or condensation.
| Pressure Sensor | |
| Pressure type | Compound pressure |
| Control | Option |
| Pressure range | 100 kpa |
| Control output | NPN |
| Cable Type | Analog current |


?10%(ripple P-P: max. 10%)