Data sheet?
Applicable fluid | (Pneumatic type) Air, Non-corrosive gas |
---|---|
Pressure port direction | Rear fitting |
Pressure port | NPT1/8 |
Connection type | Connector type(connector type cable: 2m) |
Pressure type | Negative pressure |
Rated pressure range | 0.0 to -101.3kPa |
Display pressure unit | kPa, kgf/cm?, bar, psi, mmHg, inHg, mmH?? |
Control output_PNP open collector | PNP open collector |
Option input/output | Hold/Auto shift input |
Power supply | 12-24VDC ![]() |
Current consumption | Voltage output type: Max. 50mA Current output type: Max. 75mA |
Protection structure | IP40 |
Approval | ![]() |
Control output_Hysteresis | Min. display interval |
Control output_Repeat error | ?0.2% F.S. ?Min. display interval |
Control output_Response time | Selectable 2.5ms, 5ms, 100ms, 500ms, 1000ms |
Environment_Ambient temperature | -10 to 50?? storage: -20 to 60??/td> |
Environment_Ambient humidity | 30 to 80% RH, storage: 30 to 80% RH |
Material | Front, Rear case: Polycarbonate, Pressure port: Nickel Plated Brass |
Weight | Approx. 165g(approx. 80g) |
??n hysteresis output mode, detection difference is variable.
??t is allowed to select one analog output type only.
??he weight includes packaging. The weight in parenthesis is for unit only.
??.S: Rated pressure.
??here may be ?1-digit error in hysteresis by pressure unit calculation error.
??he temperature or humidity mentioned in Environment indicates a non freezing or condensation.
Pressure Sensor | |
Pressure type | Standardpressure |
Control | Option |
Pressure range | 100 kpa |
Control output | PNP |
Cable Type | Hold/Auto shift input |