Display pressure range | Depending on pressure type, pressure unit (refer to \'??Rated Pressure and Max. Display Pressure Range\') |
---|---|
Power supply | 12-24VDC @(=) ?10%(ripple P-P: max. 10%) |
Power consumption | Max. 3W |
Current consumption | Max. 100mA (adds 20mA for RS485 communication.) |
Number of input channels | 4 EA |
Input method | DC4-20mA |
Power for external sensor | 12-24VDC @(=), 40mA for each channel (max. current of 1-4CH: max. 100mA, max. current of 5-8CH: max. 100mA) |
Control output_Hysteresis | Min. display interval |
Control output_Repeat error | ?0.1% F.S. ?min. display interval |
Control output_Response time | 2.5ms, 100ms, 500ms, 1000ms |
Control output_Protection circuits | Output short over current protection, reverse power polarity protection circuit |
Display digit | PV display part, SV display part: 4-digit, channel display part: 1-digit |
Display method_Display part | 7-segment LED method ??V display part: red or green ??V display part: green ??hannel display part: red |
Display method_Output indicator | 8 (OUT1, OUT2: 4 for each) |
Display accuracy | ?0.1% ?2-digit (at 23 ?5?? |
Control output and display temperature | 0 to 50?? ?0.2% F.S. ?2-digit (based on 25??, -10 to 0?? ?0.3% F.S. ?2-digit |
Communication | RS485 communication output(Modbus RTU) |
Connection_Input | Sensor connector (for CNE-P04, sold separately) terminal |
Connection_Output | Hirose connector 20-pin (HIF3BA-20D-2.54R, flat cable 20-wire, sold separately) terminal |
Insulation resistance | 100M??or more (500VDC megger basis) |
Dielectric strength | 1,000VAC 50/60Hz for 1 min (between power terminal and case), 500VAC 50/60Hz for 1 min (between power terminal and RS485 terminal) |
Vibration | 1.5mm amplitude at frequency of 10 to 50Hz (for 1 min) in each X, Y, Z direction for 2 hours |
Environment_Ambient temperature | -10 to 50?? storage: -20 to 60??/td> |
Environment_Ambient humidity | 30 to 85%RH, storage: 30 to 85%RH |
Accessories | Bracket |
Weight | Approx. 108g (approx. 65g) |
Tags: Sensor, Pressure, 4 Channel Pressure Sensor Indicator, 4-20mA Current input, NPN output, RS485 communication