Data sheet?
| Power supply | 10-30VDC ?10% (When connecting BD-C Series communication converter, 12-30VDC) |
|---|---|
| Power consumption | Max. 2800mW (30VDC) |
| Control input | No-voltage input |
| Judgment output | NPN or PNP open collector output (Load current: Max. 100mA) |
| Alarm output | NPN or PNP open collector output (Load current: Max. 100mA) |
| Residual voltage | NPN: Max. 1.5V, PNP: Max. 2.5V |
| Protection circuit | Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit |
| Response time | 0.33, 0.5, 1, 2, 5 ms (5-step adjustment) |
| Min. display unit | BD-030: 1?? BD-065: 2?? BD-100: 4??/td> |
| Display method | Dual display by 6-digit, 11-segment LED |
| Display range | ?99.999mm to ?99mm (4-step adjustment) |
| Display cycle | Approx. 100ms |
| Insulation resistance | Over 20M??(at 500VDC megger) |
| Noise immunity | Square shaped noise by noise simulator (pulse width: 1?? cycle: 10ms) ?500V |
| Dielectric strength | 1,000VAC 50/60Hz for 1 minute |
| Vibration | 1.5mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours |
| Shock | 300m/s? (approx. 30G) in each X, Y, Z direction for 3 times |
| Environment_Ambient temperature | -10 to 50?? storage: -15 to 60??/td> |
| Environment_Ambient humidity | Under 85%RH, storage: under 85%RH |
| Protection structure | IP40 (IEC Standards) |
| Material | Case: Polycarbonate, Cover: Polycarbonate, Cable: Polyvinyl chloride |
| Connection method | Connector type |
| Sensor head compatibility | BD Series sensor head: 1 |
| Accessories | Mounting bracket, Side connector |
| Approval |   |
| Weight | Approx. 228g (approx. 126g) |
Tags: Sensor, Laser Displacement Sensor, Amplifier, NPN or PNP Output, Alam output, Analog output (-5-5V, 1-5V, 4-2-Ma, 10-30VDC