Data sheet?

Number of input channels	2-channel
Power supply	24VDC
Allowable voltage range	90 to 110% of rated voltage
Power consumption	Max. 5W(for max. load)
Display method	None-parameter setting and monitoring is available at external devices(PC, PLC, etc.)
Input type_TC	K(CA), J(IC), E(CR), T(CC), B(PR), R(PR), S(PR), N(NN), C(TT), G(TT), L(IC), U(CC), Platinel II
Input type_RTD	DPt100?, JPt100?, DPt50?, Cu100?, Cu50?, Nikel 120? 3-wire type(permissible line resistance max. 5??
Input type_Analog	Voltage: 0-100mVDC , 0-5VDC , 1-5VDC , 0-10VDC Current: 0-20mA, 4-20mA
Sampling cycle	50ms(2-CH or 4-CH synchronous sampling)
Measurement accuracy_Thermocouple	At room temperature(23?????: (PV ?0.3% or ?1?? higher one) ?1-digit Out of room temperature range: (PV ?0.5% or ?2?? higher one) ?1-digit
Measurement accuracy_RTD	At room temperature(23?????: (PV ?0.3% or ?1?? higher one) ?1-digit Out of room temperature range: (PV ?0.5% or ?2?? higher one) ?1-digit
Measurement accuracy_Analog	At room temperature(23?????: ?0.3% F.S. ?1-digit Out of room temperature range: ?0.5% F.S. ?1-digit
Option input_CT input	0.0-50.0A(primary current measurement range) ??T ratio=1/1000, Measured accuracy: ?5% F.S. ?1-digit
Option input_Digital inputs	Connect input: ON - max. 1k?, OFF - min. 100k? Solid-state input: ON - max. residual voltage 0.9V, OFF - max. leakage current 0.5mA Outflow current: approx. 0.3mA per input
Control method	ON/OFF control, P, PI, PD, PID control
Control output_Relay	250VAC~ 3A 1a
Control output_SSR	Max. 12VDC ?3V 20mA
Control output_Current	Selectable DC 4-20mA or DC 0-20mA(load resistance max. 500??
Option output_Alarm	250VAC~ 3A 1a
Communication_Comm. terminal	RS485 communication output(Modbus RTU)
Communication_PC loader	TTL
Hysteresis(adjustable sensitivity)	RTD/Thermocouples: 1 to 100????(0.1 to 100.0????, analog: 1 to 100 digit
Proportional band	RTD/Thermocouples: 1 to 999????(0.1 to 999.9????, analog: 0.1 to 999.9 digit
Integral time	0 to 9999 sec
Derivative time	0 to 9999 sec
Control period	Relay output: 0.1 to 120.0 sec, SSR output: 1.0 to 120.0 sec
Manual reset	0 to 100%( 0.0 to 100.0%)
Relay life cycle_Mechanical	Min. 10,000,000 operations
Relay life cycle_Electrical	Min. 100,000 operations(250VAC 3A resistance load)
Memory Protection	Approx. 10 years(non-volatile semiconductor memory type)
Insulation resistance	100M??at 500VDC megger)
Insulation type	Double insulation or reinforced insulation(mark: , dielectric strength between the measuring input part and the power part: 1kV)
Dielectric strength	1,000VAC 50/60Hz for 1 min(between input terminals and power terminals)
Vibration	0.75mm amplitude at frequency of 5 o 55Hz (for 1 min) in each X, Y, Z direction for 2 hours
Noise immunity	?0.5kV the square wave noise (pulse width: 1?? by the noise simulator
Environment_Ambient temperature	-10 to 50?? storage: -20 to 60??/td>
Environment_Ambient humidity	35 to 85% RH, storage: 35 to 85% RH
Protection structure	IP20(IEC standard)
Accessories	Expansion connector: 1, module lock connector: 2
Approval
Weight_Expansion module	Approx. 245.7(approx. 172.6g)

??easured accuracy:
??t room temperature (23?????
??Thermocouple K, J, T, N, E below -100?? L, U, PLII, and RTD Cu50?, DPt50?: (PV ?0.3% or ?2?? higher one) ? 1-digit
??Thermocouple C, G and R, S below 200?? (PV ?0.3% or ?3?? higher one) ? 1-digit
??Thermocouple B below 400?? there is no accuracy standards.
??ut of room temperature range
??RTD Cu50?, DPt50?: (PV ?0.5% or ?3?? higher one) ? 1-digit
??Thermocouple R, S, B, C, G: (PV ?0.5% or ?5?? higher one) ? 1-digit
??Other blow -100?? within ?5??br>??he weight includes packaging. The weight in parenthesis is for unit only.
??nvironment resistance is rated at no freezing or condensation.
??ince the expansion module is not supplied with power/comm. terminal. Order it with the basic module.