Data sheet?
| Applicable fluid | (Fluid type) Air, Non-corrosive gas and fluid that will not corrode Stainless steel 316L | 
|---|---|
| Pressure port direction | Bottom fitting | 
| Pressure port | R1/8 | 
| Connection type | Connector type(connector type cable: 2m) | 
| Pressure type | Standard pressure | 
| Rated pressure range | 0 to 1,000kPa | 
| Display pressure unit | MPa, kPa, kgf/cm?, bar, psi | 
| Control output_PNP open collector | PNP open collector | 
| Option input/output | Voltage(1-5VDC  ) output | 
| Power supply | 12-24VDC  ?10%(ripple P-P: max. 10%) | 
| Current consumption | Voltage output type: Max. 50mA Current output type: Max. 75mA | 
| Protection structure | IP40 | 
| Approval |  | 
| Control output_Hysteresis | Min. display interval | 
| Control output_Repeat error | ?0.2% F.S. ?Min. display interval | 
| Control output_Response time | Selectable 2.5ms, 5ms, 100ms, 500ms, 1000ms | 
| Environment_Ambient temperature | -10 to 50?? storage: -20 to 60??/td> | 
| Environment_Ambient humidity | 30 to 80% RH, storage: 30 to 80% RH | 
| Material | Front case: Polycarbonate, Rear case: Polyamide 6, Pressure port: SUS304/SUS316L | 
| Weight | Approx. 173g(approx. 88g) | 
??n hysteresis output mode, detection difference is variable.
??t is allowed to select one analog output type only.
??he weight includes packaging. The weight in parenthesis is for unit only.
??.S: Rated pressure.
??here may be ?1-digit error in hysteresis by pressure unit calculation error.
??he temperature or humidity mentioned in Environment indicates a non freezing or condensation.
| Pressure Sensor | |
| Pressure type | Standardpressure | 
| Control | Standard (fluid) | 
| Pressure range | 1 mPa | 
| Control output | PNP | 
| Cable Type | Analog votage | 

