| Sensing type | Through-beam type |
| Sensing distance | 0 to 10m |
| Light source | Infrared LED(850nm modulated) |
| Power supply | 12-24VAC~ ?10% 50/60Hz12-24VDC @(=) |
| Current consumption and Power consumption | Current Consumption: Max. 2VA, Power Consumption: Max. 50mA |
| Control output | Relay(SPST(1a)) |
| Sensing Cannel | 2-channel |
| Sensitivity adjustment | Set by button |
| Sensor cable length | 10m |
| Environment_Ambient illumination | Sunlight: Max. 100,000lx(receiver illumination) |
| Environment_Ambient temperature | -20 to 55?? storage: -25 to 60??/td> |
| Protection structure | IP30 |
| Environment_Ambient humidity | 35 to 85% RH, storage: 35 to 85% RH |
| Response time | Approx. 50ms(from light OFF) |
| Output holding time | Approx. 500ms(from light ON) |
| Available sensor set | 2set |
| Sensor cable | ?2.4mm, 1-wire, 5m(AWG26, core diameter: 0.16mm, number of cores: 7, insulator out diameter: ?1.32mm) |
| Material | Sensor - Holder: Acrylonitrile butadiene styrene, Lens: Polymethyl methacrylate,Lens guide: Polycarbonate, Nut: Cu-ZnController - Housing: Acrylonitrile butadiene styrene, Cover: Acrylonitrile butadiene styrene, LED CAP: Polymethyl methacrylate, Bolt |
| Accessories | Sensor: 1 set(ADS-SH), Fixing bolt for controller: 2 pieces |
| Weight | Approx. 300g |
